Automotive
Incandescent Stop, Tail, Turn Light, Designed For Trailers Over 80" Wide, Stud Mounted Light With A Standard 2" Between Stud Centers, Includes A License Plate Illuminator.
4-3/8" x 1-7/8", Amber, Oval Trailer Reflector, Adhesive Back & Mounting Holes On 4" Centers.
3-3/16", Red, Round Reflector, With An Adhesive Backing, For Trailers Requiring Reflectors To Meet DOT Requirements.
3" Diameter, Screw On Red Trailer Reflector, Aluminum Mounting Plate, Screw Holes Are On 4" Between Center Distance, For Trailers Requiring Reflectors To Meet DOT Approvals.
4" Diameter, Halogen Tractor Light, With Rubber Non-Recessed Housing & Flood Pattern Lens, Includes Mounting Hardware, For Farm Use.
Complete Trailer Lighting Kit, For Trailer Under 80" In Width, Includes Both Street Side & Curb Side Stop, Tail, Turn Lights, Complete Wire Harness Kit With Splices & Wire Mounts, A License Plate Bracket & 2 Side Marker Lights, K DOT Approved.
Trailer Light Kit, For Trailers Over 80" In Width, Includes 2 Stop, Tail, Turn Lights, 1 For The Curb Side & 1 For The Street Side Of The Trailer, A 20' Long Wire Harness That Is Split For Each Side Of The Trailer, A License Plate Bracket, Wire Splices & Wire Holders.
Complete Towing Light Kit, Includes 2 Lights That Hook Into The Vehicle 4 Flat Towing Electrical Connector, Each Light Has A Magnetic Base & 25' Of Y Wire Harness, Each Light Has An Amber & Red Lens.
Amber Rotating Beacon, With A 12V DC X 12' Long Cord That Plugs Into The Cigarette Lighter Of Any Vehicle, A Magnetic Base That Can Stick To Any Magnetic Material, Base Has A Scratch Resistant Pad Over The Magnetic Surface, Used To Warn Drivers Of Snow Plowing Operations Or Other Roadside Operations.
4-1/2", Square, LED Stop, Tail, Turn Light, Without The License Plate Illumination Light, For Right Side Of Trailer, Curb Side, Stud Mounted Light With Studs At 2" Centers, No Special Wiring Required To Install This Light, A Replacement For Either An Incandescent Light Or LED OEM Style Light.
3-1/4" x 1", Amber, Trailer Marker Light, With White Mounting Base, Used On 12 V DC Vehicle Circuits Only.
2-3/4" x 2-1/8", Amber, Incandescent Trailer Clearance Light, Used To Identify That A Trailer Is Present, Stud Mounted, Light Is Grounded Through The Stud & Has A 1 Wire Electrical Connection To The Hot Wire Only.
4-1/8" x 2", Amber, Incandescent Marker Light, Used For Mounting On Trailers As A Side Marker Light To Identify That A Trailer Is Present As Required By The DOT.
2-3/4" x 3/4", Amber LED, Trailer Marker Light, Is A 2 Wire Application, Comes With The Chrome Cover.
4-1/2", Square, LED Stop, Tail, Turn Light, For Trailers Under 80" Wide, With A License Illumination Light, Left Side Of Trailer, Street Side, Stud Mounted Light With Studs At The Standard 2" Between Centers, No Special Wiring Is Necessary To Install This Light, A Replacement Light For An Led Or Incandescent Light.